STI ethyl cyanoacrylate glue Superfix 100gr Attack
STI SUPERFIX GEL is a contact adhesive based on ethyl cyanoacrylate
Of medium viscosity allows the adhesion of a wide range of materials: metal, plastic, leather, wood and other various types of substrate.
Speed medium / high grip.
Made in Italy
Of medium viscosity allows the adhesion of a wide range of materials: metal, plastic, leather, wood and other various types of substrate.
Speed medium / high grip.
Made in Italy
SUPERFIX LIQUID is a contact adhesive based on ethyl cyanoacrylate. Of medium viscosity allows the adhesion of a wide range of materials: metal, plastic, leather, wood and other various types of substrate. Speed of medium / high grip. MADE IN ITALY
Available in packs of 20g / 50g / 100g
PRODUCT FEATURES LIQUID
Nature: Ethyl cianoacrylate
Color: Transparent
Viscosity 25 ° C (Brookfield 20 rpm): 200-300 mPa.s
Specific gravity (g / ml): 1.05
Flammability:> 86 ° C
Product Storage:
Place cool, dry sheltered from strong light and heat sources.
Optimal Storage: refrigeration.
Shelf life: 12 months at a temperature between + 5 ° C and + 20 ° C.
PERFORMANCE OF CURED
Resistance to cutting
Sandblasted steel> 16 N / mm²
Aluminum attacked chim./elettr> 11 N / mm²
Nitrile> 12 N / mm²
Polycarbonate> 11 N / mm²
Tensile strength
Sandblasted steel> 18 N / mm²
Nitrile> 6 N / mm²
Neoprene rubber> 6 N / mm²
Rubber EPDM> 2.5 N / mm²
Operating temperature: -55 ° C + 82 ° C
n20D of refractive index: similar to glass
INFORMATION Polymerization
The polymerization is influenced by three main factors speed: nature of the materials, temperature at which the reaction occurs and environmental moisture. In particularly unfavorable conditions (low temperature, low humidity or materials that are difficult to be coupled such as polypropylene, silicone rubbers, etc.) It is necessary to use a primer.
INSTRUCTIONS FOR PROPER USE
The surfaces to be bonded must be cleaned and degreased.
Apply the amount of product required for the application. Squeeze for a few seconds the parts to be joined.
Available in packs of 20g / 50g / 100g
PRODUCT FEATURES LIQUID
Nature: Ethyl cianoacrylate
Color: Transparent
Viscosity 25 ° C (Brookfield 20 rpm): 200-300 mPa.s
Specific gravity (g / ml): 1.05
Flammability:> 86 ° C
Product Storage:
Place cool, dry sheltered from strong light and heat sources.
Optimal Storage: refrigeration.
Shelf life: 12 months at a temperature between + 5 ° C and + 20 ° C.
PERFORMANCE OF CURED
Resistance to cutting
Sandblasted steel> 16 N / mm²
Aluminum attacked chim./elettr> 11 N / mm²
Nitrile> 12 N / mm²
Polycarbonate> 11 N / mm²
Tensile strength
Sandblasted steel> 18 N / mm²
Nitrile> 6 N / mm²
Neoprene rubber> 6 N / mm²
Rubber EPDM> 2.5 N / mm²
Operating temperature: -55 ° C + 82 ° C
n20D of refractive index: similar to glass
INFORMATION Polymerization
The polymerization is influenced by three main factors speed: nature of the materials, temperature at which the reaction occurs and environmental moisture. In particularly unfavorable conditions (low temperature, low humidity or materials that are difficult to be coupled such as polypropylene, silicone rubbers, etc.) It is necessary to use a primer.
INSTRUCTIONS FOR PROPER USE
The surfaces to be bonded must be cleaned and degreased.
Apply the amount of product required for the application. Squeeze for a few seconds the parts to be joined.
Write Your Own Review