STI ethyl cyanoacrylate glue Ultrafix 20gr Gel Attack
STI ULTRAFIX GEL is a contact adhesive based on ethyl cyanoacrylate
Of high viscosity allows the adhesion of a wide range of materials: metal, plastic, leather, wood and other various types of even porous substrate. Speed Average / slow setting.
High mechanical strength allows for greater machining tolerances.
Cyanoacrylate gel for even vertical applications.
It does not drip.
Made in Italy
Of high viscosity allows the adhesion of a wide range of materials: metal, plastic, leather, wood and other various types of even porous substrate. Speed Average / slow setting.
High mechanical strength allows for greater machining tolerances.
Cyanoacrylate gel for even vertical applications.
It does not drip.
Made in Italy
ULTRAFIX GEL 20 grams packaging is a contact adhesive based on ethyl cyanoacrylate. Of high viscosity allows the adhesion of a wide range of materials: metal, plastic, leather, wood and other various types of even porous substrate. Speed Average / slow setting. High mechanical strength allows for greater machining tolerances. Cyanoacrylate gel for even vertical applications. It does not drip.
Made in italy
PRODUCT FEATURES LIQUID
Nature: Ethyl cianoacrylate
Color: Transparent
Viscosity 25 ° C (Brookfield 20 rpm):> 100,000 mPa.s
Specific gravity (g / ml): 1,10
Flammability:> 86 ° C
Product Preservation Photo: Place cool, dry sheltered from strong light and heat sources.
Optimal Storage: refrigeration.
Shelf life: ITALY 12 months at temperatures between + 5 ° C and + 20 ° C.
PERFORMANCE OF CURED
Resistance to cutting
Sandblasted steel> 15 N / mm²
Aluminum attacked chim./elettr> 11 N / mm²
Nitrile> 10 N / mm²
Polycarbonate> 12 N / mm²
Tensile strength
Sandblasted steel> 18 N / mm²
Nitrile> 6 N / mm²
Neoprene rubber> 6 N / mm²
Rubber EPDM> 2.5 N / mm²
Operating temperature: -55 ° C + 82 ° C
n20D of refractive index: similar to glass
INFORMATION Polymerization
The polymerization is influenced by three main factors speed: nature of the materials, temperature at which the reaction occurs, and environmental moisture.
INSTRUCTIONS FOR PROPER USE
The surfaces to be bonded must be cleaned and degreased. To do this, use a degreaser product. Apply the amount of product required for the application. Squeeze for a few seconds the parts to be joined.
Made in italy
PRODUCT FEATURES LIQUID
Nature: Ethyl cianoacrylate
Color: Transparent
Viscosity 25 ° C (Brookfield 20 rpm):> 100,000 mPa.s
Specific gravity (g / ml): 1,10
Flammability:> 86 ° C
Product Preservation Photo: Place cool, dry sheltered from strong light and heat sources.
Optimal Storage: refrigeration.
Shelf life: ITALY 12 months at temperatures between + 5 ° C and + 20 ° C.
PERFORMANCE OF CURED
Resistance to cutting
Sandblasted steel> 15 N / mm²
Aluminum attacked chim./elettr> 11 N / mm²
Nitrile> 10 N / mm²
Polycarbonate> 12 N / mm²
Tensile strength
Sandblasted steel> 18 N / mm²
Nitrile> 6 N / mm²
Neoprene rubber> 6 N / mm²
Rubber EPDM> 2.5 N / mm²
Operating temperature: -55 ° C + 82 ° C
n20D of refractive index: similar to glass
INFORMATION Polymerization
The polymerization is influenced by three main factors speed: nature of the materials, temperature at which the reaction occurs, and environmental moisture.
INSTRUCTIONS FOR PROPER USE
The surfaces to be bonded must be cleaned and degreased. To do this, use a degreaser product. Apply the amount of product required for the application. Squeeze for a few seconds the parts to be joined.
Write Your Own Review