STI Universal Glue Ultrafix 100g Cyanoacrylate Gel Adhesive for Various Plastic Materials and 3D Printing
STI SUPERFIX GEL is a contact adhesive based on ethyl cyanoacrylate
With medium viscosity allows adhesion of a wide range of materials: metal, plastics, even for 3D printing, leather, wood, and other various types of substrate.
Medium/high setting speed.
Made in Italy
With medium viscosity allows adhesion of a wide range of materials: metal, plastics, even for 3D printing, leather, wood, and other various types of substrate.
Medium/high setting speed.
Made in Italy
SUPERFIX LIQUID is a contact adhesive based on ethyl cyanoacrylate. With medium viscosity, it allows adhesion of a wide range of materials: metal, plastics, even for 3D printing, leather, wood, and other various types of substrates. Medium/high setting speed. MADE IN ITALY
Available in packages of 20g/50g/100g
LIQUID PRODUCT CHARACTERISTICS
Nature: Modified ethyl cyanoacrylate
Color: Transparent
Viscosity 25°C (Brookfield 20 rpm) : 200-300 mPa.s
Specific weight (g/ml): 1.05
Flammability: >86°C
Product Storage:
Store in a cool, dry place away from strong light and heat sources.
Optimal Storage: refrigeration.
Warehouse stability: 12 months at a temperature between +5°C and +20°C.
HARDENED PRODUCT PERFORMANCE
Shear strength
Sandblasted steel > 16 N/mm²
Chemically/electrically etched aluminium > 11 N/mm²
Nitrile rubber > 12 N/mm²
Polycarbonate > 11 N/mm²
Tensile strength
Sandblasted steel > 18 N/mm²
Nitrile rubber > 6 N/mm²
Neoprene rubber > 6 N/mm²
EPDM rubber > 2.5 N/mm²
Operating temperature: -55°C +82°C
Refractive index n20D: similar to glass
CURING INFORMATION
The curing speed is influenced by three main factors: nature of the materials, the temperature at which the reaction occurs, and ambient humidity. Under particularly unfavorable conditions (low temperature, low ambient humidity, or difficult-to-bond materials like polypropylene, silicone rubbers, etc.), a Primer is required.
USAGE INSTRUCTIONS
The surfaces to be glued must be clean and degreased.
Apply the necessary amount of product for the application. Compress the parts to be joined for a few seconds.
Available in packages of 20g/50g/100g
LIQUID PRODUCT CHARACTERISTICS
Nature: Modified ethyl cyanoacrylate
Color: Transparent
Viscosity 25°C (Brookfield 20 rpm) : 200-300 mPa.s
Specific weight (g/ml): 1.05
Flammability: >86°C
Product Storage:
Store in a cool, dry place away from strong light and heat sources.
Optimal Storage: refrigeration.
Warehouse stability: 12 months at a temperature between +5°C and +20°C.
HARDENED PRODUCT PERFORMANCE
Shear strength
Sandblasted steel > 16 N/mm²
Chemically/electrically etched aluminium > 11 N/mm²
Nitrile rubber > 12 N/mm²
Polycarbonate > 11 N/mm²
Tensile strength
Sandblasted steel > 18 N/mm²
Nitrile rubber > 6 N/mm²
Neoprene rubber > 6 N/mm²
EPDM rubber > 2.5 N/mm²
Operating temperature: -55°C +82°C
Refractive index n20D: similar to glass
CURING INFORMATION
The curing speed is influenced by three main factors: nature of the materials, the temperature at which the reaction occurs, and ambient humidity. Under particularly unfavorable conditions (low temperature, low ambient humidity, or difficult-to-bond materials like polypropylene, silicone rubbers, etc.), a Primer is required.
USAGE INSTRUCTIONS
The surfaces to be glued must be clean and degreased.
Apply the necessary amount of product for the application. Compress the parts to be joined for a few seconds.
Write Your Own Review