STI Universal Glue Ultrafix 20g Gel Cyanoacrylate Superglue for Various Materials Plastic and 3D Printing
STI ULTRAFIX GEL is a contact adhesive based on ethyl cyanoacrylate
With high viscosity, it allows adhesion of a wide range of materials: metal, plastics, also for 3D printing, leather, wood, and other various types of substrates, even porous ones. Medium/slow setting speed.
High mechanical resistance allows greater processing tolerances.
Gel cyanoacrylate for vertical applications as well.
Does not drip.
Made in Italy
With high viscosity, it allows adhesion of a wide range of materials: metal, plastics, also for 3D printing, leather, wood, and other various types of substrates, even porous ones. Medium/slow setting speed.
High mechanical resistance allows greater processing tolerances.
Gel cyanoacrylate for vertical applications as well.
Does not drip.
Made in Italy
ULTRAFIX GEL in a 20-gram package is a contact adhesive based on ethyl cyanoacrylate. With high viscosity, it allows adhesion of a wide range of materials: metal, plastics, also for 3D printing, leather, wood, and other various types of substrates, even porous ones. Medium/slow setting speed. High mechanical resistance allows greater processing tolerances. Gel cyanoacrylate for vertical applications as well. Does not drip.
Made in Italy
PRODUCT LIQUID CHARACTERISTICS
Nature: Modified ethyl-cyanoacrylate
Color: Transparent
Viscosity 25°C (Brookfield 20 rpm): > 100,000 mPa.s
Specific weight (g/ml): 1.10
Flammability: >86°C
Product storage
: Cool and dry place away from strong light and heat sources.
Optimal Storage: refrigeration.
Shelf stability:
12 months at a temperature between +5°C and +20°C.
CURED PRODUCT PERFORMANCE
Shear Strength
Sandblasted steel > 15 N/mm²
Chem/electr. etched aluminum > 11 N/mm²
Nitrile rubber > 10 N/mm²
Polycarbonate > 12 N/mm²
Tensile Strength
Sandblasted steel > 18 N/mm²
Nitrile rubber > 6 N/mm²
Neoprene rubber > 6 N/mm²
EPDM rubber > 2.5 N/mm²
Operating temperature: -55°C +82°C
Refractive index n20D: similar to glass
CURING INFORMATION
The curing speed is influenced by three main factors: the nature of the materials, the temperature at which the reaction occurs, and the ambient humidity.
INSTRUCTIONS FOR PROPER USE
The surfaces to be glued must be clean and degreased. Use a degreasing product for this operation. Apply the necessary amount of the product for the application. Compress the parts to be joined for a few seconds.
Made in Italy
PRODUCT LIQUID CHARACTERISTICS
Nature: Modified ethyl-cyanoacrylate
Color: Transparent
Viscosity 25°C (Brookfield 20 rpm): > 100,000 mPa.s
Specific weight (g/ml): 1.10
Flammability: >86°C
Product storage
: Cool and dry place away from strong light and heat sources.
Optimal Storage: refrigeration.
Shelf stability:
12 months at a temperature between +5°C and +20°C.
CURED PRODUCT PERFORMANCE
Shear Strength
Sandblasted steel > 15 N/mm²
Chem/electr. etched aluminum > 11 N/mm²
Nitrile rubber > 10 N/mm²
Polycarbonate > 12 N/mm²
Tensile Strength
Sandblasted steel > 18 N/mm²
Nitrile rubber > 6 N/mm²
Neoprene rubber > 6 N/mm²
EPDM rubber > 2.5 N/mm²
Operating temperature: -55°C +82°C
Refractive index n20D: similar to glass
CURING INFORMATION
The curing speed is influenced by three main factors: the nature of the materials, the temperature at which the reaction occurs, and the ambient humidity.
INSTRUCTIONS FOR PROPER USE
The surfaces to be glued must be clean and degreased. Use a degreasing product for this operation. Apply the necessary amount of the product for the application. Compress the parts to be joined for a few seconds.
Write Your Own Review