STI Universal Glue Ultrafix 20gr Gel Cyanoacrylate Attack for Various Plastic Materials and 3D Printing
STI SUPERFIX Liquid is a contact adhesive based on ethyl cyanoacrylate.
With medium viscosity, it allows adhesion to a wide range of materials: metal, plastics, even for 3D printing, leather, wood, and various other substrates.
Medium/high bonding speed.
Made in Italy
With medium viscosity, it allows adhesion to a wide range of materials: metal, plastics, even for 3D printing, leather, wood, and various other substrates.
Medium/high bonding speed.
Made in Italy
SUPERFIX LIQUID is a contact adhesive based on ethyl cyanoacrylate. With medium viscosity, it allows adhesion to a wide range of materials: metal, plastics, even for 3D printing, leather, wood, and various other substrates. Medium/high bonding speed. MADE IN ITALY
Available in 20g/50g/100g packaging
PRODUCT CHARACTERISTICS LIQUID
Nature: Modified ethyl cyanoacrylate
Color: Transparent
Viscosity 25°C (Brookfield 20 rpm): 200-300 mPa.s
Specific weight (g/ml): 1.05
Flammability: >86°C
Product storage:
Store in a cool and dry place, away from strong light and heat sources.
Optimal storage: refrigeration.
Warehouse stability: 12 months at temperatures ranging from +5°C to +20°C.
POLYMERIZED PRODUCT PERFORMANCE
Shear strength
Sandblasted steel > 16 N/mm²
Chemically/electrically attacked aluminum > 11 N/mm²
Nitrile rubber > 12 N/mm²
Polycarbonate > 11 N/mm²
Tensile strength
Sandblasted steel > 18 N/mm²
Nitrile rubber > 6 N/mm²
Neoprene rubber > 6 N/mm²
EPDM rubber > 2.5 N/mm²
Working temperature: -55°C +82°C
Refractive index n20D: similar to glass
POLYMERIZATION INFORMATION
The polymerization speed is influenced by three main factors: the nature of the materials, the reaction temperature, and ambient humidity. In particularly unfavorable conditions (low temperature, low ambient humidity, or difficult-to-join materials like polypropylene, silicone rubbers, etc.), a Primer is necessary.
INSTRUCTIONS FOR CORRECT USE
The surfaces to be glued must be clean and degreased.
Apply the necessary amount of product for the application. Compress the parts to be joined for a few seconds.
Available in 20g/50g/100g packaging
PRODUCT CHARACTERISTICS LIQUID
Nature: Modified ethyl cyanoacrylate
Color: Transparent
Viscosity 25°C (Brookfield 20 rpm): 200-300 mPa.s
Specific weight (g/ml): 1.05
Flammability: >86°C
Product storage:
Store in a cool and dry place, away from strong light and heat sources.
Optimal storage: refrigeration.
Warehouse stability: 12 months at temperatures ranging from +5°C to +20°C.
POLYMERIZED PRODUCT PERFORMANCE
Shear strength
Sandblasted steel > 16 N/mm²
Chemically/electrically attacked aluminum > 11 N/mm²
Nitrile rubber > 12 N/mm²
Polycarbonate > 11 N/mm²
Tensile strength
Sandblasted steel > 18 N/mm²
Nitrile rubber > 6 N/mm²
Neoprene rubber > 6 N/mm²
EPDM rubber > 2.5 N/mm²
Working temperature: -55°C +82°C
Refractive index n20D: similar to glass
POLYMERIZATION INFORMATION
The polymerization speed is influenced by three main factors: the nature of the materials, the reaction temperature, and ambient humidity. In particularly unfavorable conditions (low temperature, low ambient humidity, or difficult-to-join materials like polypropylene, silicone rubbers, etc.), a Primer is necessary.
INSTRUCTIONS FOR CORRECT USE
The surfaces to be glued must be clean and degreased.
Apply the necessary amount of product for the application. Compress the parts to be joined for a few seconds.
Write Your Own Review