STI Universal Glue Ultrafix 50gr Gel Cyanoacrylate Attack for Various Materials Plastic and 3D Printing
STI SUPERFIX GEL is a contact adhesive based on ethyl cyanoacrylate
Medium viscosity allows adhesion of a wide range of materials: metal, plastics, also for 3D printing, leather, wood, and other various types of substrate.
Medium/high setting speed.
Made in Italy
Medium viscosity allows adhesion of a wide range of materials: metal, plastics, also for 3D printing, leather, wood, and other various types of substrate.
Medium/high setting speed.
Made in Italy
SUPERFIX LIQUID is a contact adhesive based on ethyl cyanoacrylate. Medium viscosity allows adhesion of a wide range of materials: metal, plastics, also for 3D printing, leather, wood, and other various types of substrate. Medium/high setting speed. MADE IN ITALY
Available in packaging of 20gr/50gr/100gr
PRODUCT CHARACTERISTICS LIQUID
Nature: Modified ethyl-cyanoacrylate
Color: Transparent
Viscosity 25°C (Brookfield 20 rpm): 200-300 mPa.s
Specific weight (g/ml): 1.05
Ignitability: >86°C
Product storage:
Store in a cool and dry place away from strong light and heat sources.
Optimal storage: refrigeration.
Shelf stability: 12 months at a temperature between +5°C and +20°C.
PERFORMANCE OF CURED PRODUCT
Shear resistance
Sandblasted steel > 16 N/mm²
Chemically/electrically attached aluminum > 11 N/mm²
Nitrile rubber > 12 N/mm²
Polycarbonate > 11 N/mm²
Tensile resistance
Sandblasted steel > 18 N/mm²
Nitrile rubber > 6 N/mm²
Neoprene rubber > 6 N/mm²
EPDM rubber > 2.5 N/mm²
Operating temperature: -55°C +82°C
Refractive index n20D: similar to glass
CURING INFORMATION
The curing speed is influenced by three main factors: the nature of the materials, the temperature at which the reaction occurs, and environmental humidity. Under particularly unfavorable conditions (low temperature, low environmental humidity, or materials difficult to bond like polypropylene, silicone rubber, etc.) it is necessary to use a Primer.
INSTRUCTIONS FOR CORRECT USE
The surfaces to be bonded must be clean and degreased.
Apply the necessary amount of product for the application. Compress the parts to be joined for a few seconds.
Available in packaging of 20gr/50gr/100gr
PRODUCT CHARACTERISTICS LIQUID
Nature: Modified ethyl-cyanoacrylate
Color: Transparent
Viscosity 25°C (Brookfield 20 rpm): 200-300 mPa.s
Specific weight (g/ml): 1.05
Ignitability: >86°C
Product storage:
Store in a cool and dry place away from strong light and heat sources.
Optimal storage: refrigeration.
Shelf stability: 12 months at a temperature between +5°C and +20°C.
PERFORMANCE OF CURED PRODUCT
Shear resistance
Sandblasted steel > 16 N/mm²
Chemically/electrically attached aluminum > 11 N/mm²
Nitrile rubber > 12 N/mm²
Polycarbonate > 11 N/mm²
Tensile resistance
Sandblasted steel > 18 N/mm²
Nitrile rubber > 6 N/mm²
Neoprene rubber > 6 N/mm²
EPDM rubber > 2.5 N/mm²
Operating temperature: -55°C +82°C
Refractive index n20D: similar to glass
CURING INFORMATION
The curing speed is influenced by three main factors: the nature of the materials, the temperature at which the reaction occurs, and environmental humidity. Under particularly unfavorable conditions (low temperature, low environmental humidity, or materials difficult to bond like polypropylene, silicone rubber, etc.) it is necessary to use a Primer.
INSTRUCTIONS FOR CORRECT USE
The surfaces to be bonded must be clean and degreased.
Apply the necessary amount of product for the application. Compress the parts to be joined for a few seconds.
Write Your Own Review