Two-component Polyurethane Adhesive Synthetic Grass Lawn for parquet
Polyurethane two-component adhesive, without water, ideal for the installation of synthetic surfaces and flooring.
Also good for bonding insulating panels (polystyrene, polyurethane foam, rock wool), tiles, building materials and metal supports. Suitable for all types of junction bands for synthetic turfs, provides a tough and durable bonding. Application with a notched trowel.
Yield: 800/1400 gr / sqm. Color: Oak / Walnut. Mixing ratio: 9/1 Made in Italy.
Also good for bonding insulating panels (polystyrene, polyurethane foam, rock wool), tiles, building materials and metal supports. Suitable for all types of junction bands for synthetic turfs, provides a tough and durable bonding. Application with a notched trowel.
Yield: 800/1400 gr / sqm. Color: Oak / Walnut. Mixing ratio: 9/1 Made in Italy.
Polyurethane two-component adhesive, without water, ideal for the installation of synthetic surfaces, planks of wood, pre-finished parquet, and pre-calibrated.
Excellent also for gluing insulating panels (polystyrene, polyurethane foam, rock wool), on asbestos cement tiles and chipboard, construction materials and metallic substrates.
The adhesive must always be used in dry condition and applied with a notched trowel.
To paste the synthetic lawn, even in the case of laying of paving tiles or cement, we recommend not to use the glue directly on the supporting surface to prevent the pavement from being damaged when you decide to remove or replace the turf.
For a perfect synthetic turf laying, we suggest, therefore, use of junction strips towel (towel mulching), of 30/40 cm width to be placed in correspondence with the junctions of the lawn. Simply combine the different parts and glue on the underlying strip to obtain a uniform and stable turf.
In case you have purchased our Lawn Pro, given the high density of the product (over 3kg per square meter), these will be sufficient small steps to guarantee an excellent result without the need to paste the lawn for its entire surface.
Caratteristite Techniques
Application: notched trowel
Yield: 800/1400 gr / m² (depending on substrate)
Color: Oak / Walnut
Mixing ratio: 9/1
Application temperature: not less than 10 ° C
Processing time: 2 h
Cure: 36/48 h
Apply on dry substrate, healthy, non-dedusting with low humidity (max 2% humidity)
Excellent value for money. Made in Italy.
Excellent also for gluing insulating panels (polystyrene, polyurethane foam, rock wool), on asbestos cement tiles and chipboard, construction materials and metallic substrates.
The adhesive must always be used in dry condition and applied with a notched trowel.
To paste the synthetic lawn, even in the case of laying of paving tiles or cement, we recommend not to use the glue directly on the supporting surface to prevent the pavement from being damaged when you decide to remove or replace the turf.
For a perfect synthetic turf laying, we suggest, therefore, use of junction strips towel (towel mulching), of 30/40 cm width to be placed in correspondence with the junctions of the lawn. Simply combine the different parts and glue on the underlying strip to obtain a uniform and stable turf.
In case you have purchased our Lawn Pro, given the high density of the product (over 3kg per square meter), these will be sufficient small steps to guarantee an excellent result without the need to paste the lawn for its entire surface.
Caratteristite Techniques
Application: notched trowel
Yield: 800/1400 gr / m² (depending on substrate)
Color: Oak / Walnut
Mixing ratio: 9/1
Application temperature: not less than 10 ° C
Processing time: 2 h
Cure: 36/48 h
Apply on dry substrate, healthy, non-dedusting with low humidity (max 2% humidity)
Excellent value for money. Made in Italy.
Write Your Own Review